中外合资、合作经营企业机电产品以产顶进管理办法(附英文)(已废止)
国家经委
中外合资、合作经营企业机电产品以产顶进管理办法(附英文)
1987年10月7日，国家经委
第一条 根据国务院批准由国家计委发布的《关于中外合资、合作经营企业产品以产顶进办法》的有关规定，特制订本办法。
第二条 凡具备下列各项条件的企业，可以申请将其产品列入《机电产品以产顶进目录》（以下简称目录）：
1、能够提供国内需要的先进技术，从事新产品开发，实现产品升级换代的中外合资、合作经营企业（以下简称企业），因外汇平衡出现暂时困难，需要给予扶持的；
2、企业生产的机电产品与国外同类产品的性能和质量相同，能满足国内用户的需要，售价不高于国外同类产品进口价（完税后价格）的；
3、企业生产的机电产品属于国内用户需要进口的；
4、企业按批准的合同履行外销责任。
第三条 凡要求产品以产顶进的中外合资、合作经营项目，应在报批可行性研究报告时对以产顶进的可行性进行充分的论证和评估。
第四条 企业投产后，其产品符合上述第二条的规定要求列入国家以产顶进目录的，由企业向产品归口部门提出申请，抄报国家经委、经贸部和当地经委。申请时，须附送机电产品以产顶进申请表、产品质量证明文件、市场需求预测的调查报告，由产品归口部门审核签署意见，报国家经委会同国家外汇管理局审批，审批时间一般不超过两个月，并由国家经委公布实施。
第五条 需要目录内产品的用户可直接向企业订货，或由中国机电设备招标中心（或经国家经委批准的招标公司）按国家有关规定在国内组织招标，指导用户在国内选购，以代替进口。
第六条 企业销售国家以产顶进目录内的机电产品，经外汇管理部门批准，允许收取部分外汇，并要依据合同或可行性研究报告规定的国产化进度逐年递减。
第七条 企业生产国家以产顶进目录内的机电产品需要进口的散件、零部件、元器件、配套件和原材料，可由海关作为保税货物监管。国内用户直接从国外进口这类机电产品时享受减免进口税待遇的，企业生产的同类机电产品如售给这些用户时，所进口的料、件也可享受同样的减免税待遇。
第八条 本办法由国家经委负责解释。
第九条 本办法自公布之日起施行。
国家经委同时还公布了第一批机电产品以产顶进目录：一是ＳＰＥＣＴＲＵＭ－－集中分散型控制系统（含现场输入、输出装置，每站1024ＢＩＴ数据采集装置，顺序控制、编程控制装置，ＣＲＴ操作站，工业控制机），生产企业是上海福克斯波罗有限公司；二是ＭＩＣＯＮＩＣ－－Ｂ 交调电梯（额定速度1．6Ｍ／Ｓ，载重1000ＫＧ），生产企业是中国迅达电梯公司上海电梯厂。
MEASURES FOR THE CONTROL OF THE SUBSTITUTION OF MACHINERY ANDELECTRICAL APPLIANCES MANUFACTURED BY CHINESE-FOREIGN EQUITY JOINT VEN-TURES AND CHINESE-FOREIGN CONTRACTUAL JOINT VENTURES FOR SIMILAR IMPORTEDPRODUCTS
Important Notice: (注意事项)
英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民
共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.
Whole Document (法规全文)
MEASURES FOR THE CONTROL OF THE SUBSTITUTION OF MACHINERY AND
ELECTRICAL APPLIANCES MANUFACTURED BY CHINESE-FOREIGN EQUITY JOINT VEN-
TURES AND CHINESE-FOREIGN CONTRACTUAL JOINT VENTURES FOR SIMILAR IMPORTED
PRODUCTS
(Approved by the State Council and promulgated by the State Econo-
mic Commission on October 7, 1987)
Article 1
These Measures are formulated in accordance with the pertinent provisions
in Procedures for the Substitution of Products Manufactured by Chinese-
foreign Equity Joint Ventures and Chinese-foreign Contractual Joint
Ventures for Similar Imported Products, approved by the State Council and
promulgated by the State Planning Commission.
Article 2
Enterprises which satisfy the following conditions may make an application
for the inclusion of their products in the Catalogue of the Substitution
of Home-made Machinery and Electrical Appliances for Similar Imported
Products (hereinafter referred to as the "Catalogue"):
(1) Chinese-foreign equity joint ventures and Chinese-foreign contractual
joint ventures (hereinafter referred to as "the enterprises"), which are
capable of providing advanced technology that satisfies domestic needs,
and are engaged in the development of new products, thereby realizing the
upgrading of products and the replacement of old products with new ones,
but which are at present confronted with the temporary difficulties of an
imbalance in foreign exchange and are badly in need of support;
(2) the machinery and electrical appliances manufactured by the
enterprises are the same in performance and quality as similar products
produced in foreign countries, they can satisfy the needs of domestic
users, and their prices (the prices after taxation) are no higher than the
prices of similar imported products produced abroad;
(3) the machinery and electrical appliances manufactured by the
enterprises are in the categories that the domestic users want to import;
(4) the enterprises execute their obligations to export products in
accordance with the approved contracts.
Article 3
Chinese-foreign equity joint ventures and Chinese-foreign contractual
joint ventures, which apply for the substitution of their products for
similar imported foreign goods, shall prove by an ample demonstration and
appraise the feasibility of substituting their products for similar
imported ones at the time when they submit their feasibility studies
report for examination and approval.
Article 4
After the enterprises have gone into production, if their products are in
conformity with the stipulations of Article 2 mentioned above and they
request to have their products included in the State catalogue of the
substitution of home-made products for similar imported ones, the
enterprises shall make an application to the department concerned, and
submit duplicates of the application separately to the State Economic
Commission, the Ministry of Foreign Economic Relations and Trade, and the
local economic commission. The application shall be accompanied with an
application form for the substitution of home-made machinery and
electrical appliances for similar imported products, a certification
document testifying to the quality of the products, and report on market
demand projection for the said products; and the application shall be
examined and verified by the department concerned which shall, after
affixing its comments and seal to the application, transmit the
application to the State Economic Commission and the State Administration
of Foreign Exchange Control for examination and approval. Generally, the
period of time for the examination and approval shall not exceed two
months, and the approved items shall be promulgated by the State Economic
Commission for execution.
Article 5
The users who need the products listed in the Catalogue may place an order
directly with the enterprises, or the China Bidding Center for Machinery
and Electrical Equipment (or other bidding agencies authorized by the
State Economic Commission) shall, in accordance with the pertinent
provisions promulgated by the State, organize bidding, thus providing
advice to users for purchasing home-made products to substitute for
similar imported ones.
Article 6
Enterprises which sell machinery and electrical appliances listed in the
State catalogue of the substitution of home-made products for similar
imported goods may, with the approval of the administration of foreign
exchange control, collect part of the payment for goods in foreign
exchange, and the amount shall decrease progressively in accordance with
the rate of progress for the replacement of imported products with home-
made ones, specified in the contract or feasibility studies report.
Article 7
The bulk parts, spare parts, components, fittings and raw materials, which
the enterprises need for the production of machinery and electrical
appliances listed in the State catalogue of the substitution of home-made
products for similar imported goods, may be considered as bonded goods and
be placed under the surveillance of the Customs. Where the users enjoy
the preferential treatment of reduction of or exemption from duties when
they import the aforesaid machinery and electrical appliances directly
from abroad, the enterprises shall enjoy the same preferential treatment
of reduction of or exemption from duties when they import the said raw
materials, spare parts and components to produce similar machinery and
electrical appliances and sell them to the said users.
Article 8
The right to interpret these Measures shall reside in the State Economic
Commission.
Article 9
These Measures shall go into effect as of the date of promulgation.
Appendix
The catalogues of the first lot of machinery and electrical appliances
used in substituting for similar imported products and promulgated
simultaneously by the State Economic Commission: the first is SPECTRUM -
the control system of the centralized/decentralized type (including field
input/output installations, each station 1024 BIT data collecting set,
sequence control, programming control set, CRT operating station,
industrial controller), the enterprise that produces these products is the
Shanghai Fawkes-Polo Co. Ltd.; the second is MICONIC - B elevator (rated
speed 1.6 M/S, carrying capacity 1,000 KG), the enterprise that produces
this product is the Shanghai Elevators Factory of the China Schindler
Elevators Company.
关于进一步加强医疗广告管理的通知
国家工商局 卫生部
国家工商行政管理局 卫生部
关于进一步加强医疗广告管理的通知
工商广字[2001]第32号
各省、自治区、直辖市及计划单列市工商行政管理局、卫生厅（局）：
为进一步加强医疗广告管理，从根本上解决医疗广告虚假违法现象突出的问题，依据《广告法》、《医疗广告管理办法》，现就有关问题通知如下：
一、凡未取得《医疗机构执业许可证》的，一律不得发布医疗广告。医疗机构内部科室不得单独以科室或以专科门诊等名义发布广告。
二、医疗广告必须按照省级怀生行政部门出具的《医疗广告证明》中医闻广告格式化内容发布。未实行格式化的医疗广告，一律师停止发布。
继续暂停发布性病医疗广告。
三、禁止以新闻报道形式发布医疗广告。有关医疗机构的人物专访、专题报道等文章不得出现有关医疗机构详细地址、电话、联系办法等广告宣传内容；在发表有关文章的同时，不得在同一媒介体同一时间或版面发布有关该服务及其医疗机构的广告。
四、广告经营者、广告发布者必须严格审查《医疗广告证明》并按《医疗广告证明》中医疗广告格式化内容发布。对卫生行政部门核定的医疗广告格式化内容，不得进行任何改动。不得设计、制作、代理、发布未取得《医疗广告证明》的医疗广告。
五、卫生行政部门要严格按照格式化要求，合肥市据《医疗广告管理办法》和本通知的规定，依法出具医疗广告证明，核定医疗广告格式化内容，并向同级工商行政管理部门备案。
六、工商行政管理机关要切实加强医疗广告的监督管理，对未按卫生行政部门核定和备案的医疗广告格式化内容发布的，要依法予以查处。对以新闻报道形式发布医疗广告的，依照《广告法》第四十条规定予以处罚；对超出医疗广告格式内容发布的，依照《医疗广告管理办法》第十八条规定予以处罚；其他违反本通知规定的行为。依据《广告法》有关规定予以处罚，《广告法》无相应处罚条款的，依据《医疗广告管理办法》有关规定予以处罚。
二00一年一月十九日
